FIND AN INSPECTOR

Resources

Home | Resources | Standard of Practice | Pool and Spa Standard

Pool and Spa Standard

AUXILIARY STANDARDS OF PROFESSIONAL PRACTICE FOR RESIDENTIAL SWIMMING POOL AND SPA INSPECTIONS

1. INSPECTION PURPOSE AND SCOPE

1.1 The purpose of these Standards of Professional Practice (Standards) is to establish a uniform standard for inspectors who voluntarily use these Standards when performing residential swimming pool/spa inspections.

1.2 Inspections performed in accordance with these Standards:

  1. Provide the client with additional objective information about the condition of inspected components at the time of the inspection;
  2. Are conducted by an inspection generalist, not by a technical specialist;
  3. Are general and do not include or confirm conformity with:
    1. Building codes and other governmental laws and regulations,
    2. Manufacturer's installation instructions,
    3. Construction plans, drawings, and specifications;
  4. Do not provide a warranty or guarantee regarding the condition of the inspected swimming pools/spas;
  5. Do not identify and report all possible safety issues regarding the installation, operation, maintenance, and use of inspected swimming pools/spas.

1.3 These Standards do not limit inspectors from:

  1. Including other services or components in addition to those required in these Standards;
  2. Excluding components from the inspection if requested by the client.

1.4 Inspectors who perform inspections in accordance with these Standards shall adhere to the ASHI® Code of Ethics For the Home Inspection Profession.

1.5 These Standards apply only to swimming pools/spas located on property containing a one or two-family residential structure. These standards do not apply to swimming pools/spas used for commercial or competitive uses.

2. INSPECTION AND REPORT

2.1 Inspectors shall inspect readily accessible, visually observable, installed components designated in these Standards.

2.2 Inspectors shall issue a written report that:

  1. Identifies components that, in the professional judgment of the inspector, are not functioning properly, significantly deficient, unsafe, or are near the end of their service lives;
  2. Provides the reasoning or explanation as to the nature of the deficiencies reported in 2.2.A that are not self-evident;
  3. Recommends correction, further evaluation, or monitoring of components identified in 2.2.A;
  4. Identifies components designated for inspection in these Standards that were present during the inspection but were not inspected and the reason(s) why they did not inspect them;
  5. Includes the statement from Appendix A in its entirety and without a change in every report issued using these Standards.

3.0 SWIMMING POOL AND SPA INSPECTION

3.1 Inspectors shall:

  1. Inspect:
    1. The visible parts of interior finish materials,
    2. The visible parts of decks, steps inside the swimming pool/spa shell, and coping,
    3. The visible parts of pumps, motors, blowers, skimmer, filters, drains, heaters, automatic safety controls, gauges, visible piping and valves, conduit,
    4. Cross connections in the water supply system,
    5. External bonding of the pump motors, blowers, heaters, and other components that are required to be bonded,
    6. Operation of readily accessible lights, ground fault circuit interrupters, electrical components, and timer assemblies that are related to the pool or spa,
    7. The visible parts of permanently installed handrails and ladders,
    8. For the presence of safety barriers and alarms,
    9. For the presence of entrapment prevention components,
    10. Vegetation, grading, surface drainage, and retaining walls that are likely to affect the swimming pool or spa adversely. pool or spa;
  2. Describe:
    1. Type of swimming pool/spa,
    2. Interior finish materials,
    3. Type of filter,
    4. Types of safety barriers,
    5. Type of cleaning system (if present),
    6. The energy source for the heater (if present);
  3. Operate the systems using normal operating controls;
  4. Open readily openable access panels.

3.2 Inspectors are not required to:

  1. Test, operate, or evaluate components when weather conditions or other circumstances may cause equipment damage;
  2. Test, operate, or evaluate automatic safety controls and manual or automatic valves;
  3. Touch swimming pool/spa water to examine the structure, components, and features, including their composition and quality;
  4. Test, operate, or evaluate electric resistance heaters;
  5. Determine structural integrity;
  6. Inspect any equipment or component that is shut down, or that is not responding to normal operating controls, including conditions caused by the absence of a required energy source such as electricity or gas;
  7. Inspect, test, operate, or evaluate: low voltage or electronic controls, water chemistry or clarity, out-of-level conditions, presence or absence of bacteria/algae, backwash functions, aerators, automatic cleaning systems, automatic water fill systems, water treatment systems, chemical dispensers, thermostats, heating elements, heat exchangers, solar and other alternative energy heating systems, water features, covers, and related components, accessories, leaks in shell, underground components, temporary safety barriers and alarms, stray voltage, and the interior of filters including filter cartridges;
  8. Inspect, test, operate, or evaluate diving and jump boards, slides, play equipment, and similar components; and the suitability of the pool for the use of such components for activities such as diving; and
  9. Determine the adequacy of: system or component design, structural components, equipment and component compatibility, flow rates, high or low-pressure conditions, filters, heaters, safety barriers and alarms, and entrapment prevention components.

4. GENERAL LIMITATIONS AND EXCLUSIONS

4.1 General Limitations

  1. Inspectors are not required to perform any action or make any determination not specifically required in these Standards.
  2. Inspections performed following these Standards are not:
    1. Numerically complete, and
    2. Required to identify or report concealed conditions, latent defects, consequential damages, and cosmetic issues.

4.2 General Exclusions

  1. Inspectors are not required to determine:
    1. Condition of components that are not installed or that are not visible and readily accessible;
    2. Strength, adequacy, effectiveness, or efficiency of any component, including structural components;
    3. Methods, materials, or costs of corrections;
    4. Future conditions including, but not limited to, component failure and the life expectancy of components;
    5. The suitability of a swimming pool/spa or components for any specialized use;
    6. The presence or absence of any environmental hazards including, but not limited to, toxins, allergens, carcinogens, electromagnetic radiation, noise, radioactive substances, and contaminants in soil, water, and air;
    7. The presence or absence of potentially hazardous or damaging plants and animals including, but not limited to, wood destroying organisms and diseases harmful to humans, including molds and mold-like substances;
    8. Operating costs of components;
    9. Acoustic properties of any component;
    10. Soil conditions relating to geotechnical or hydrologic specialties;
    11. Causes of or reasons for the condition of components identified in 2.2.A;
    12. The safety of using the swimming pool/spa or any component;
    13. The risks or benefits of adding new components and of modifying existing components;
    14. Whether the swimming pool/spa or any component is free from leakage of any kind;
    15. Whether any item, material, condition, or component is subject to recall, controversy, litigation, products liability or other adverse claim or condition;
    16. The adequacy of operation, maintenance, and use of the swimming pool/spa and any component.
  2. Inspectors are not required to:
    1. Perform any act or service contrary to law or regulation;
    2. Perform architectural, engineering, or surveying services or to confirm or evaluate such services performed by others;
    3. Perform any trade or any professional service other than as required in these Standards;
    4. Offer or provide warranties or guarantees of any kind;
    5. Perform any procedure or operation or enter any area that may, in the opinion of the inspector, be dangerous to the inspector or other persons, or that may cause damage to the property or components;
    6. Move personal property, equipment, plants, soil, snow, ice, or debris;
    7. Inspect installed decorative items;
    8. Inspect component interiors that are not readily accessible; and
    9. Dismantle any component, except as explicitly required by these Standards

GLOSSARY OF ITALICIZED TERMS

Alarm— See safety barrier.

Automatic safety controls— Devices designed and installed to protect components from unsafe conditions.

Client— A person who hires an inspector to perform an inspection in following these Standards.

Component— A primary part of a functionally related group that works together as a system, not including ancillary parts, such as signage and depth markers, that do not contribute to the intended function of the system.

Coping— The decorative material around the perimeter above a swimming pool/spa, usually located just above the tile.

Cosmetic issues— Defects that are superficial and that do not significantly affect a component's ability to function properly.

Cross-connection— Any connection between two otherwise separate piping systems whereby there may be a flow from one system to another.

Decorative— Ornamental; not required for the proper operation of the swimming pool/spa components.

Describe— To identify (in writing) a component by its type or by other distinguishing characteristics.

Dismantle— To take apart or remove any component, device, or equipment that is bolted, screwed, or fastened by other means and that a homeowner would not take apart or remove in the course of routine household maintenance.

Electronic controls— Digital, computerized, solid-state,or equipment operation management devices.

Entrapment prevention component— A component, such as a suction outlet cover, installed within the swimming pool/spa water circulation system that helps prevent a person from being held underwater at a suction outlet.

Further evaluate— Examination and analysis by a qualified professional, tradesman, or service technician using techniques and/or expertise that are beyond the scope of inspections performed following these Standards.

Inspect— To visually examine components following these Standards, using normal operating controls and opening readily openable access panels.

Inspector— A person who a client hires to inspect a swimming pool/spa following these Standards.

Installed— A component that is connected or set in position and prepared for use.

Normal operating controls— Devices such as thermostats and switches intended to be operated by the homeowner.

Numerically complete— An inspection that inspects every individual occurrence of a component.

Readily accessible A component that is located where access will not involve risk to persons or property, and that is visible without: (1) moving matter of any kind, and (2) using tools, and (3) using a ladder taller than twelve feet.

Readily openable access panel— A panel provided for homeowner inspection and maintenance that is readily accessible, within normal reach, can be removed by one person and is not sealed in place.

Safety— Freedom from danger, risk, or injury.

Safety barrier— a component, such as a fence or a door or a window alarm that helps restrict access to a swimming pool/spa.

Shut down— A state in which normal operating controls cannot operate a system or component.

Structural component— A component that supports non-variable forces or weights (dead loads) and variable forces or weights (live loads).

Swimming pool/spa— A contained body of water eighteen inches or more in-depth at any point and intended for swimming or immersion.

Technical specialist— A person who, because of training, education, and experience, has expertise in a specific trade or profession that is beyond that of an inspector and who might, because of this expertise, or by the use of specialized tools, instruments, measurements, testing, calculations, or other means discover issues not discovered by an inspector.

Unsafe— A condition in a readily accessible, installed system or component that, in the professional judgment of the inspector, presents a significant risk of bodily injury during normal, day-to-day use. The risk may be due to damage, deterioration, improper installation, or a change in accepted swimming pool/spa construction methods.

APPENDIX A

IMPORTANT NOTICE

The American Society of Home Inspectors, Inc. (ASHI) does not verify the qualifications of inspectors who use these Standards and has no authority or control over the quality of inspections undertaken or performed using these Standards. These Standards are general and are not intended to in any way discourage or limit additional or more detailed inspections. ASHI disclaims all liability for any/all personal and bodily injuries and damages, including but not limited to incidental and consequential damages, which may occur as a result of inspections performed using these Standards. No warranty, expressed or implied, is intended or offered by ASHI in the use of these Standards. ASHI assumes no risk and makes and implies no representations of any kind to inspectors, consumers, or others.

Back to Top